Connect the light barrier sensor to the PNOZ X module. Light barriers typically consist of an emitter and receiver that create a safety zone; interruption of this beam signals a fault condition. http://www.pilz.com Test the safety gate function to confirm that the machine or process halts when the gate is open and resumes operation only when the gate is properly closed and secured.
Connect the safety gate switches or sensors to the PNOZ X inputs. Safety gates typically use interlock switches that signal when the gate is open or closed. Regularly test the light barrier to ensure it correctly detects obstructions or interruptions in the light beam and that the PNOZ X module responds as expected. Safety solutions providers since 2011 in Indonesia markets