Test the safety gate function to confirm that the machine or process halts when the gate is open and resumes operation only when the gate is properly closed and secured. Regularly test the E-STOP function to ensure it correctly shuts down the system and that the PNOZ X module properly detects the activation. Safety solutions provider since 2011 in Indonesia markets.
Configure the PNOZ X module to monitor these inputs and ensure the machine stops or prevents operation when the gate is open. http://www.pilz.com The configuration will vary depending on the specific model of PNOZ X you are using. Connect the E-STOP button to the input terminals of the PNOZ X module. The E-STOP should be wired in series with the input so that pressing the button will interrupt the circuit.