Ensure the PNOZpower module is configured according to the required safety category (e.g., SIL 3, PL e) based on the risk assessment of the machinery. Follow manufacturer guidelines and local safety regulations for wiring and installation of safety devices and relays. Regularly test the safety functions and maintain the system to ensure reliability and compliance with safety standards.
If a person or object interrupts the light barrier beam in a hazardous area, the PNOZpower module will detect this and trigger a safety response. This could involve stopping the machinery, activating warning signals, or other safety measures depending on the specific configuration. Set up the module to react appropriately to interruptions or changes in the light barrier signals.
Connect the output signals from the light barriers (typically through safety relays or directly, depending on the system) to the input terminals of the PNOZpower module. Light barriers use beams of light to detect the presence of objects or personnel in hazardous areas. If a safety gate is opened while the machinery is operating, the PNOZpower module will detect this and send a signal to stop the machinery (depending on the safety strategy implemented). Closing the safety gate again may require manual intervention to reset the system and resume operation. Leading distributor pilz in Indonesia markets, We offer Pilz http://www.pilz.com