Connect the contacts of the emergency stop button to the input terminals of the PNOZ m B0. The PNOZ m B0 monitors these inputs to detect when the emergency stop button is pressed, ensuring the machine or process stops safely. Safety solutions provider since 2011, Authorised distributor pilz in Indonesia markets.
Similar to emergency stop devices, wire the contacts of two-hand pushbuttons to input terminals of the PNOZ m B0. This allows the PNOZ m B0 to monitor the status of the pushbuttons and ensure both buttons are pressed simultaneously for safety. Safety solutions providers, We offer Pilz.
Connect the safety gate limit switches to the input terminals of the PNOZ m B0. These switches indicate the open or closed status of safety gates. The PNOZ m B0 monitors these inputs to ensure gates are closed before allowing the machine to operate.
Light beam devices typically have a transmitter and receiver. The output of the receiver (which indicates the presence or absence of the light beam) can be connected to an input of the PNOZ m B0. This allows the relay system to monitor if the light beam is interrupted, triggering a safety response.
Safety scanners often have outputs that indicate the presence of an object in a specific zone. Connect these outputs to input terminals of the PNOZ m B0 to monitor the status of the scanner. This enables the relay system to respond to detected objects in the scanner’s field.
The PNOZ m B0 also has outputs that can be connected to safety-related devices such as relays, contactors, or actuators. These outputs are used to control the operation of safety devices based on the status of the inputs (e.g., stopping a machine if an emergency stop button is pressed). http://www.pilz.com